How to Install Channel List in Enigma2 - Complete Guide 2026
Hello Friends!
Many users ask how to install a new Channel List in Enigma2 Box. Today I will show you the easiest method. It will take only 5 minutes.
What is a Channel List?
A Channel List contains the list of all channels of your satellite. With an old list, new channels will not appear. So you should update your list after every 2-3 months.
*What You Need:*
1. Enigma2 Box - Dreambox, Vu+, Zgemma, any box
2. USB or Laptop
3. Internet Connection
*Method 1 - By USB:*
*Step 1:* Download the latest Channel List on your computer. Download according to your satellite, like Paksat 38E or Asiasat.
*Step 2:* Format your USB to FAT32 and copy the Channel List file into USB.
*Step 3:* Insert the USB in your Box.
*Step 4:* Now from Remote go to:
Menu > Setup > Service Searching > Manual Scan
*Step 5:* Select your Satellite there and Start Scan. All channels will appear in 5 minutes.
*Method 2 - By DreamboxEdit:*
If you have a Laptop, this method is the best.
1. Connect Laptop and Box to same WiFi
2. Open DreamboxEdit software
3. Enter IP of your Box - To check IP go to Menu > Information > Network
4. Open Channel List in software and Send it to Box
Done! Restart your Box, new channels will appear.
*Common Problems:*
*Q: Channels are coming but No Signal?*
A: Check your Dish setting, it can be LNB problem.
*Q: Channels disappeared after installing list?*
A: Always take backup of your old list before installing new one.
Friends, if anyone is facing any problem in any step, write your Box name and Satellite name in comment below, I will reply.
*Final Note:* Always use latest channel list. Old list will not show new channels. Update your list after every 2-3 months for best result.
This post is finished. Publish it now.
Hello Friends!
Many users ask how to install a new Channel List in Enigma2 Box. Today I will show you the easiest method. It will take only 5 minutes.
What is a Channel List?
A Channel List contains the list of all channels of your satellite. With an old list, new channels will not appear. So you should update your list after every 2-3 months.
*What You Need:*
1. Enigma2 Box - Dreambox, Vu+, Zgemma, any box
2. USB or Laptop
3. Internet Connection
*Method 1 - By USB:*
*Step 1:* Download the latest Channel List on your computer. Download according to your satellite, like Paksat 38E or Asiasat.
*Step 2:* Format your USB to FAT32 and copy the Channel List file into USB.
*Step 3:* Insert the USB in your Box.
*Step 4:* Now from Remote go to:
Menu > Setup > Service Searching > Manual Scan
*Step 5:* Select your Satellite there and Start Scan. All channels will appear in 5 minutes.
*Method 2 - By DreamboxEdit:*
If you have a Laptop, this method is the best.
1. Connect Laptop and Box to same WiFi
2. Open DreamboxEdit software
3. Enter IP of your Box - To check IP go to Menu > Information > Network
4. Open Channel List in software and Send it to Box
Done! Restart your Box, new channels will appear.
*Common Problems:*
*Q: Channels are coming but No Signal?*
A: Check your Dish setting, it can be LNB problem.
*Q: Channels disappeared after installing list?*
A: Always take backup of your old list before installing new one.
Friends, if anyone is facing any problem in any step, write your Box name and Satellite name in comment below, I will reply.
*Final Note:* Always use latest channel list. Old list will not show new channels. Update your list after every 2-3 months for best result.
This post is finished. Publish it now.